Invoking BIOS Setup
The setup function can only be invoked by pressing F2 when Press <F2> to enter Setup message is
prompted on the bottom of screen during POST.
The setup uses a menu driven interface to allow the user to configure their system. The features are divided
into 6 parts as follows:
Information
Main
Advanced
Security
Boot
Exit
NOTE: You can change the value of a parameter if it is enclosed in square brackets. Navigation keys for a
particular menu are shown on the bottom of the screen. Help for parameters are found in the Item
Specific Help part of the screen. Read this carefully when making changes to parameter values. Please
note that system information is subject to different models.
48
Display the system informations.
allows the user to specify standard IBM PC AT system parameters.
Provides advanced settings of the system.
Provides security settings of the system.
Allows the user to specify the boot options.
Allows the user to save CMOS setting and exit Setup.
Chapter 2