Controls - Hunter 36516 Owner's Manual

Speed Setting:
Off Turns the unit off.
Low: Extends the time between refills by running the fan on low.
Lowest noise setting recommended for nighttime use.
Medium: Average refill rate and optimal for day use. Minimal noise
level.
High: Use for quick humidification to a room during the day. Average
noise level and quick refill rate.
Humidity Control:
The humidity control allows you to set the amount of humidity you want
the unit to output. The humidty knob is a percentage, ranging from 30%
at it's lowest to 80% at the highest. Turn the knob clockwise to increase
humidity output. When the humidifier has reached the set humidity
level, it will shut off until the humidity level drops agian.
Indicators:
Power Indicator: Indicates the unit is turned on. If the humidifier is not running,
check that the humidity control has not turned the unit off by increasing the
humidity. For additional help check "Troubleshooting" on page 10.
UVC Indicator: Indicates the UVC is running. This light should always be on if the
unit is running.
6
Using Your Humidifier

Controls

44055-01 • 05/18/2011
2
Speed
Control
Power
UVC
Power UVC
Indicator Indicator
Figure 4.
Humidity
Control