Introduction; Switch Description - D-Link 1016T - DGS Switch User Manual

Introduction

Switch Description

Switch Features
D-Link Green Ethernet Technology
Ports
Front-Panel Components
LED Indi cators
Power Input on Rear Panel
Switch Description
The 16-port DGS-1016T and 24-port DGS-1024T Switches provide dedicated
10, 100 or 1000 Mbps Ethernet bandwidth on each port. The ports will
automatically detect the speed, duplex and MDI/M DIX status of the device it
is connecting to, and adjust these settings accordingly. The Switch ports can be
used to network co mputers, printers, servers, routers, other switches or any
device equipped with an Ethernet port. Fo r best performance, use Category 5
or better Ethernet cabling.
This stand-alone Switch is very easy to set up, there is no network
management required. Just power on the Switch and connect the cables. Keep
in mind however that the standard rules of Ethernet regarding cab le length
apply to this and all Ethernet devices. The length of an Ethernet cable fro m one
device to another cannot exceed 100 meters (or 300 feet).
SECTION 1
10