D-Link DGS-1016T Specifications

16-port Copper Gigabit Switch for SMB
This rack-mount switch offers an economical way for the small and medium business (SMB) to benefit from the increased
bandwidth of Gigabit Ethernet. It provides 16 Gigabit ports for server deployment and other bandwidth-intensive applications.
With plug-and-play installation and copper Gigabit ports capable of connecting to your existing Cat. 5 twisted-pair cable,
this device instantly enhances your workgroup's performance without requiring you to install expensive fiber cables or to go
through complex re-configuration.
16 Copper Gigabit Ports
16 copper Gigabit ports provide an inexpensive alternative
solution to fiber-optic. Using your existing low-cost Cat. 5
copper twisted-pair wires as the transmission media, these
ports allow you to instantly upgrade your servers to
Gigabit capability without requiring you to install new,
expensive fiber cables. All ports support 10/100/1000Mbps
network speed auto-sensing and full/half duplex auto-
negotiation.
For downstream network expansion, you can also attach
these Gigabit ports to 10/100Mbps switches, from which
workstations can access the network.
Full-duplex Gigabit Access
The Gigabit ports provide dedicated bandwidths for
servers and switch cascading running at 2000Mbps full-
duplex. This provides bottleneck-free paths for fast
network throughputs.
IEEE 802.3x Flow Control
This function support allows your servers to directly
connect to the switch for fast, reliable data transfer. At
2000Mbps full duplex, the switch provides high-speed data
pipes to your servers with minimum data transfer loss.
Features
Inexpensive Gigabit solution for SMB
16 10/100/1000Mbps Gigabit ports on Cat. 5 cable
Auto MDI/MDIX cross over for all ports
Secure store-and-forward switching scheme
Full/half-duplex for Ethernet/Fast Ethernet speeds
Gigabit Switch Series
DGS-1016T
DGS-1016T rack-mount switch with 16
10/100/1000Mbps Gigabit ports
Auto-negotiation of MDI/MDIX Cross Over
All ports support auto-negotiation of MDI/MDIX cross
over. This eliminates the need for cross over cables or
uplink ports. Any port can simply plug to a server, a hub or
a switch, using the usual straight-through twisted-pair
cable.
Seamless Integration
The switch integrates seamlessly with your existing
network equipment, be it Ethernet, Fast Ethernet or
Gigabit Ethernet, dispensing you of the need to replace
any hardware or software.
Plug-and-Play Installation
With 10/100/1000Mbps auto-sensing, auto-negotiation for
every port, plus the ability to exist with your Cat. 5 wall
wiring, network installation is a breeze. All you
need to do is plug the cables to the switch, and your
network is up and running in a matter of minutes.
Blazing 2000Mbps full duplex for Gigabit speed
IEEE 802.3x Flow Control for protection against data loss
Plug-and-play installation
19-inch standard rack size