A&D HC-15Ki Instruction Manual page 28

5. Press the ENTER key to save the setting
and move to next F-Function, f-05-02.
6. Continue to enter f-05 comparator settings
– refer to "9-2. F-Functions" for a listing. If
there are no changes to a F-Function, press
the ENTER key to move to the next.
7. When finished: press the ON/OFF key to exit. Then,
press it to turn the display back ON. Comparator
functions and limits will now operate as set.
Viewing Comparator Limits
The comparator limits you are using will be shown by pressing the
Set f-09-01="0" to use this mode.
1. Press the
will be shown.
2. Press the key again, then lower
limit will be shown.
3. Press the
return to normal.
Changing Comparator Limits Instead of Setting the F-Function
Set f-09-01="0" to use this mode.
1. To change the upper limit, use the 0
9 10-key pad to display new
limit in step 1 above, and press the
ENTER key. Then new limit is
memorized and the lower limit will
be shown.
2. To change the lower limit, use the 0
9 10-key pad to display new
limit, and press the
Then the display will return to normal
with the new limit.
Pressing the
the input data is not memorized.
These limits are held in memory even if power
to the scale is switched off.
key, then upper limit
key. The display will
ENTER key.
key to go to next step,
8f-05-02
ENTER
88Clear8
00
ENTER
888. 8 . -
WEIGHT
88-0. 0
888. 8 . -
WEIGHT
ENTER
88-0. 0
888. 8 . -
ENTER
WEIGHT
88-0. 0
26
aidal00
8
To ENTER
or
MOVE to next
key.
COUNT
102
UNIT WEIGHT
008 11Hi00
8
Upper limit
COUNT
102
UNIT WEIGHT
008 11Hi00
8
COUNT
198
UNIT WEIGHT
008 11lo00
8