Rinse Aid; To Switch Off The Control Indicator For Rinse Aid - AEG FAVORIT 40740 User Instructions

Rinse aid

Rinse aid ensures thorough rinsing, spot and streak free drying of
dishes and glassware.
Rinse aid can be added in one of two ways:
• If you use the dishwasher detergent and rinse aid separately, add the
rinse aid to the rinse aid container.
If you opt for this method, please note that
– the rinse aid container must never be empty.
– the amount of rinse aid dispensed must be set.
• If you use dishwasher detergent which already contains rinse aid, add
this to the detergent compartment.
If you opt for this method, please note that
– the rinse aid container must be empty in order to avoid dispensing
too much rinse aid.
– You can switch off the
control indicator would stay on permanently owing to the empty
container.
Only use rinse aid specifically designed for domestic dishwashers. Never
1
fill the rinse aid container with dishwasher detergent or any other sub-
stance (e.g. vinegar essence) as this would damage the appliance.

To switch off the control indicator for rinse aid

0 1. The appliance must be switched off.
2. Press the softener and function buttons simultaneously and keep them
pressed.
3. In addition press the ON/OFF button.
The LED indicators for the function and water softener buttons flash.
4. Press the function button again.
The LED indicator for the function button flashes.
L
5. The indicator shows the current setting:
L
The indicator flashes:
L
The indicator does not flash:
6. Pressing the function button switches the control indicator on or off.
7. If the control indicator is set, press the ON/OFF button.
The setting for the control indicator is then stored.
H
control indicator. Otherwise, the
Control indicator switched on (factory setting)
Control indicator switched off
Operating Instructions
H
13