Connection - Yamaha EF5200DE - Premium Generator Owner's Manual

A
1

Connection

Alternating Current (AC)
WARNING
Be sure any electric devices are turned off before
plugging it in.
NOTICE
9 Be sure all electric devices including the lines
and plug connections are in good condition
before connection to the generator.
9 Be sure the total load is within generator rated
output.
9 Be sure the receptacle load current is within
receptacle rated current.
TIP
Make sure to ground (earth) the generator.
When the electric device is earthed, always the gener-
ator must be earthed.
1. Start the engine.
2. Plug into the AC receptacle.
3. Make sure the voltage meter indicates the rated
voltage.
If the voltage meter does not indicate the rated
voltage (i.e., when using an extension cord, etc.),
use the voltage adjuster to adjust the output volt-
age to the rated voltage.
å Voltage meter
TIP
Turn the voltage adjuster clockwise or counterclock-
779-032a
wise to increase or decrease output voltage.
1 Voltage adjuster
779-039a
– 22 –