HP LC2000r - NetServer - 128 MB RAM Configuration Manual page 2

Service pack
SPU
Model
Clock speed
No. of CPUs
BIOS version
CPU cache
RAM
No. of power supplies
Local storage
I/O slots:
Storage
Local
Physical drive location
Disk drives
Controller
SCSI bus
Shared
Controller
Model
No. of controllers
Firmware
BIOS
Driver
NetRAID Assistant
SPU I/O slot
SCSI ID
Channels
RAID level
Logical disks
Configuration
options:
SP4 or later
HP NetServer LXr 8000
400, 450, 500, or 550 MHz
2 – 4
ASPN1.86L.0003 or later (400/450 MHz with Rack Storage/12 Model
D5989A)
ASPN Release 10 (400/450 MHz with Rack Storage/12 Model D5989B)
ASPN Release 10 (500/550 MHz)
Any size
256 MB minimum. Must be HP.
3
See Local Storage below.
P3 – P4 Shared storage controller
P1 – NetRAID-3Si local storage
P5 – Client LAN
P6 – Intra-cluster (Heartbeat) LAN
All others – Any other plug-in cards.
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/8
or /12)
Must be HP
May use embedded SCSI or NetRAID-3Si in PCI slot P1 otherwise any
controller listed on the HP Tested Products List.
May not use NetRAID-1, NetRAID-3, or NetRAID-1Si.
Any HP cables that meet SCSI specifications and any SCSI bus speed
HP NetRAID-3Si Adapter D5955A
1
W.01.20
B.01.10
2.22
A.01.15 or later
P3 – P4
6, 7
0, 1, 2
1, 5, 10, 50
1 per RAID array
Cluster mode on
Cache write-policy to write-thru
Set bus speed for Rack Storage/8 to Ultra
Set any other options as you prefer
2