To listen to stereo sound:
1
From the Sound menu, press
select Audio Setup and then press
2
Press
or
3
To save the new settings, highlight Done and
then press
To revert to the factory defaults, highlight
Reset and then press
Note:
•
You can typically leave the TV in Stereo
mode because it will automatically output
the type of sound being broadcast (stereo or
monaural).
If the stereo sound is noisy, select Mono to
•
reduce the noise.
To listen to an alternate language on an
ATSC digital station (if available):
Highlight the Language field in step 2 above,
and then press
prefer.
To listen to a second audio program on an
analog station (if available):
Select SAP in step 2 above.
Note:
A second audio program (SAP) can be
•
heard only on those TV stations that offer it.
For example, a station might broadcast
another language as a second audio
program. If you have SAP on, you will see
the current program on the screen but hear
the other language instead of the program's
normal audio.
If you have SAP on and the station you are
•
watching is not broadcasting a second audio
program, the station's normal audio will be
output. However, occasionally there is no
sound at all in SAP mode. If this happens,
set the MTS feature to Stereo mode.
Downloaded from
www.Manualslib.com
Chapter 6: Using the TV's features
or
or
to select MTS, and then press
to select Stereo.
.
.
or
to select the language you
manuals search engine
Adjusting the audio quality
You can adjust the audio quality by adjusting the
to
bass, treble, and balance.
.
1
From the Sound menu, press
select Audio Settings and then press
2
Press
or
adjust (Bass, Treble or Balance).
3
Press
or
makes the bass or treble weaker or
•
increases the balance in the left channel
(depending on the item selected).
makes the bass or treble stronger or
•
increases the balance in the right
channel (depending on the item
selected).
4
To save the new settings, highlight Done and
then press
To revert to the factory defaults, highlight
Reset and then press
Note: Selecting Speakers in step 2 and
setting it to Off will mute the TV's built-in
speakers.
Selecting the optical audio output
format
You can use this feature to select the optical audio
output format when you connect a Dolby Digital
decoder or other digital audio system to the
Optical Audio Out terminal on the TV (
"Connecting a digital audio system" on Page 22).
1
From the Sound menu, press
select Audio Setup and then press
2
Press
or
Format and then press
Dolby Digital or PCM, depending on your
device.
3
To save the new settings, highlight Done and
then press
To revert to the factory defaults, highlight
Reset and then press
or
to select the item you want to
to adjust the level.
.
.
or
to select Optical Output
or
to select either
.
.
to
.
to
.
41