Scrolling the TheaterWide
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the
TheaterWide 2 and TheaterWide 3 modes for each
input.
1
From the Picture menu, press
select Theater Settings and then press
2
In the Picture Size field, select either
TheaterWide 2 or TheaterWide 3 (you
cannot scroll in any other mode).
3
Press
4
Press
down as needed and then press
5
To save the new settings, highlight Done and
then press
To revert to the factory defaults, highlight
Reset and then press
Note: When receiving a signal at 480i
resolution, the picture scroll function may
have limited adjustment range.
Using the auto aspect ratio
feature
When the auto aspect ratio feature is set to On, the
TV will automatically select the picture size when
one of the following input sources is received:
A 480i, 480p, 720p, 1080i digital signal from the
•
ANT/CABLE input
A 480i signal from the Video input
•
A 480i signal from the ColorStream HD input
•
•
A 480i, 480p, 720p, 1080i, 1080p, or VGA
(60Hz) signal from the HDMI 1/2 input
Note: The auto aspect ratio feature is not
applicable to the PC input.
To turn on the auto aspect ratio feature:
1
From the Picture menu, press
select Theater Settings and then press
2
Press
and then press
press
3
To save the new settings, highlight Done and
then press
To revert to the factory defaults, highlight
Reset and then press
Downloaded from
www.Manualslib.com
Chapter 6: Using the TV's features
®
to highlight the Picture Scroll field.
or
to scroll the picture up and
.
.
or
to select Auto Aspect Ratio
to select On and then
or
.
.
.
manuals search engine
picture
Selecting the cinema mode
When you view a DVD (3:2 pulldown processed)
from a DVD player connected to the Video,
ColorStream HD (component video), or HDMI
inputs on the TV, smoother motion can be obtained
by setting the Cinema Mode to Film.
or
to
To set the Cinema Mode to Film:
.
(available for 480i and 1080i signals)
1
From the Picture menu, press
select Theater Settings and then press
2
Press
then press
.
press
3
To save the new settings, highlight Done and
then press
To revert to the factory defaults, highlight
Reset and then press
To set the Cinema Mode to Video:
Select Video in step 2 above.
or
to
.
or
to select Cinema Mode and
to select Film and then
or
.
.
.
or
to
.
37