Exit Store Demo; Basic Tv Operation; Changing Channel - JVC Emerald EM37T User Manual

Basic Operations
7
Press OK to start channel scan.
Scanning
Channel scan in process, if you want to stop
scanning, please press "Stop Scan".
Scan Status:
Analog Channel:
Digital Channel:
Stop Scan
OK Select
Note:
Scanning may take some time to complete.
Select Stop Scan to cancel the auto scan at anytime.
8
When auto scan is complete, press OK to
continue.
Scan Finish
Channel scan completed.
Analog Channels:
Digital Channels:
OK
Select
9
Press OK to complete setup.
Finish
Initial Setup has finished, please press "OK" to
exit Setup Wizard.
OK Select
0%
0
0
12
26
OK
RETURN INFO
Previous Setup Exit
OK
RETURN Previous Setup INFO Exit

Exit Store Demo

1
Press RETURN.
2
Press to select "OK", then press OK to
or
con rm.
Do you wish to exit Retail Mode?
OK

Basic TV Operation

Changing Channel

Press the number buttons to directly select
channels.
Note: After pressing the number buttons, there will be
a few seconds delay before the TV changes channel. To
change to the channel right away, press ENT after pressing
the number buttons.
To Browse Channel
Press the Channel up/down buttons on the remote
control.
Press to scroll through the
CH
channels manually.
To Select Analog Channels
1~9 Press 1~9 as needed. Example,
to select channel 2, press 2, then
press ENT.
10~99 Press the 2 digits in order.
Example, to select channel 15,
press 1, 5, then ENT.
100~135: Press the 3 digits in order,
Example, to select channel 130,
press 1, 3, 0, then press ENT.
Cancel
17