Table of Contents
Advertisement
System Setup and Operation (Continued)
Selecting an Audio Parameter for Setup
Press the Menu button to activate the main
setup menu, as shown on the right:
Press the ▲ or ▼ button to select the Audio
then press the ◄ or ► button to enter the
setup menu. Press the ▲ or ▼ button to
select one of the Audio parameters for
setting. Press the ◄ or ► button again to
return to the previous menu. Press the Exit
button to exit the setup menu.
Audio Language
Press the ▲ or ▼ button to select Audio Language then press the Enter button to select the
desired audio language.
TRUBASS
Press the ▲ or ▼ button to select TRUBASS then press
the Enter button to activate the adjusting mode. Press
the ◄ or ► button to adjust the value. Press the Enter
button again to confirm and return.
Digital Audio Output
Press the ▲ or ▼ button to select the Digital Audio Output then press the Enter button to select
RAW or PCM. Once the desired setting is selected press ◄ or ► to exit.
TV Speaker
Press the ▲ or ▼ button to select TV Speaker then press the Enter button to select On or Off. Once
the desired setting is selected press ◄ or ► to exit.
Mode
Press the ▲ or ▼ button to select Mode, press the Enter button to cycle through the available
options: TRUBASS , BYPASS, WOW,TSXT. Once the desired setting is selected press ◄ or ► to
exit.
Settings
Press the ▲ or ▼ button to select Settings then press the Enter button to have the unit restore all
the factory settings for the current parameters shown on the screen.
- 26 -
Advertisement
Table of Contents
