Disassembly And Assembly Procedures - Sharp FO-1470 Service Manual

UX-510UA
FO-1470U

[2] Disassembly and assembly procedures

•
This chapter mainly describes the disassembly procedures. For the assembly procedures, reverse the disassembly procedures.
•
Easy and simple disassembly/assembly procedures of some parts and units are omitted. For disassembly and assembly of such parts and units,
refer to the Parts List.
•
The numbers in the illustration, the parts list and the flowchart in a same section are common to each other.
•
To assure reliability of the product, the disassembly and the assembly procedures should be performed carefully and deliberately.
Operation panel unit, document guide
1
lower and rear cover
1
Hook the three lock nail
to LOWER CABINET.
Parts list (Fig. 1)
No. Part name
1 Mechanism unit
2 Operation panel unit
3 Screw (3 12)
4 Side cover
5 Screw (3 12)
6 Screw (3 10)
7 Rear cabinet
8 Screw (3 10)
Rib
An attachment rib is attached
in accordance with hole.
Fig. 1
3 – 4
Q'ty No. Part name
1 9 Hook switch lever
1 10 Document guide lower unit 1
2 11 Transfer gear
1 12 Transfer bearing
1 13 Transfer roller
2 14 Feed gear ass'y
1 15 Paper feed roller
4 16 Document guide lower
Q'ty
1
1
3
1
1
1
1