Download Print this page
AT&T SB67128 User Manual
Hide thumbs Also See for SB67128:

Advertisement

Quick Links

Important product information
This symbol is to alert you to important
operating or servicing instructions that may
appear in this user's manual. Always follow basic
safety precautions when using this product to
reduce the risk of injury, fire, or electric shock.

Safety information

• Read and understand all instructions in the
user's manual. Observe all markings on the
product.
• Avoid using this product during a
thunderstorm. There may be a slight
chance of electric shock from lightning.
• Do not use this product in the vicinity of
a gas leak. If you suspect a gas leak, report
it immediately, but use this product away from
the area where gas is leaking. If this product is a
cordless model, make sure the base is also away
from the area.
• Do not use this product near water, or
when you are wet. For example, do not use
it in a wet basement or shower, or next to
a swimming pool, bathtub, kitchen sink, or
laundry tub. Do not use liquids or aerosol
sprays for cleaning. If this product comes in
contact with any liquids, unplug any line or
power cord immediately. Do not plug the
product back in until it has dried thoroughly.
• Install this product in a protected location
where no one can trip over any line or power
cords. Protect cords from damage or abrasion.
Part 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the SB67128 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AT&T SB67128

  • Page 1: Safety Information

    Part 1 Important product information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information •...
  • Page 2 • If this product does not operate normally, read Troubleshooting on pages 8-9 of the part 2 user's manual. If you cannot solve the problem, or if the product is damaged, refer to the Limited warranty section on pages 8-12 of this user's manual.
  • Page 3 FCC, ACTA and IC information If this equipment was approved for connection to the telephone network prior to July 23, 2001, it complies with Part 68 of the Federal Communications Commission (FCC) rules. If the equipment was approved after that date, it complies with the Part 68 rules and with the Technical Requirements for Connection of Equipment to the Telephone Network adopted...
  • Page 4 2. Connection and use with the nationwide telephone network. The plug and jack used to connect this equipment to the premises wiring and the telephone network must comply with the applicable part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug are provided with this product.
  • Page 5 to correct the problem and the telephone service provider is required to inform you of your right to file a complaint with the FCC. Your telephone service provider may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product.
  • Page 6: Part 15 Of Fcc Rules

    Part 15 of FCC rules Some telephone equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used properly, may cause interference to radio and television reception. This product has been tested and found to meet the standards for a class B digital device, as specified in part 15 of the FCC rules.
  • Page 7 Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation. The term ‘’IC:‘’ before the certification/ registration number only signifies that the Industry Canada technical specifications were met.
  • Page 8: Limited Warranty

    Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the 1 (888) 915-2007 United States of America, call www.telephones.att.com or visit 1 (866) 288-4268. In Canada, call 1.
  • Page 9 modules, or equipment. Repair or replacement of the PRODUCT, at the manufacturer’s option, is your exclusive remedy. The manufacturer will return the repaired or replacement products to you in working condition. You should expect the repair or replacement to take approximately 30 days. 3.
  • Page 10 accessories; or • PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or • PRODUCT purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to products used for rental purposes);...
  • Page 11 PRODUCT failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, the manufacturer will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of products that are not covered by this...
  • Page 12 and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the PRODUCT is fit for ordinary use)
  • Page 13 www.telephones.att.com © 2009 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Issue 3 AT&T 09/09.