Viewing Jpeg Files; Customizing The Function Settings - RCA DRC99392 Product Manual

Programmable Memory
2. Input the title (2 digits) and chapter (2 digits) by pressing the
number buttons (for example: 01 02, 02 05, 02 11). It will move to
the next item automatically.
• You can use the Cursor buttons ( , , , ) to move the highlighted
bar to any item, and re-enter the title and chapter. Press the
NEXT / PREV to move to the next / previous setup page.
• You can use the Cursor buttons ( , , , ) to move the highlighted
bar to "Clear", "Exit", "Start" or "Next / Prev", and press the ENTER
button to confirm.
PLAY button on the remote control or
3. Press the
unit to start memory playback.
(" " appears on the screen).
Program Program
4. To resume normal playback from memory playback
1). Press the MEMORY button to display the memory menu.
2). Use the Cursor buttons ( , , , ) to move the highlighted
bar to "Stop". Press the ENTER button to confirm "Stop".
3). Use the Cursor buttons ( , , , ) to highlight "Clear", and
then press the ENTER button to confirm.
4). Use the Cursor buttons ( , , , ) to highlight "Exit", and then
press the ENTER button to confirm. It will return to normal
playback (" " disappears from the screen).
Program Program
Notes:
• If the title or chapter number entered is not permitted by the DVD,
it will disappear. you should re-enter correct number.
• You should input items one by one following the 1, 2, 3 ... sequence.
• If the DVD contains only one title, you can only arrange order for
chapters.
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player
repeats the current memory playback.
• If you press the MEMORY button while the display appears on the
TV screen, the display disappears.
• The programmed selections will be cleared when you press the
STOP button two times, open the disc tray or turn off the DVD
player.

Viewing JPEG Files

This unit can play JPEG files recorded on a CD-R or CD-ROM disc (CD-RW
is not recommended).
Viewing JPEG Files
1. Press the OPEN knob to open
the disc door.
2. Hold a JPEG file disc by its edges
and gently push it onto the
spindle with the label side facing
up until you hear a "click".
3. Close the disc door. The JPEG
files on the disc will be displayed
one by one automatically. If the disc does not play automatically,
PLAY button on the remote control or
press the
unit.
4. Press the MENU or STOP button to display a folder list. Press the
/ button to highlight a JPEG file to play. Press the
on the remote control or button on the unit to start playback.
8
RCA DRC99392_Eng & Spa IB_MTK A5_17-3-2011.indd 8
Viewing JPEG Files
Notes:
• You can press the PAUSE button on the remote control or
on the unit to freeze the picture. Press the
remote control or
• You can press the STOP button to quit playback.
• You can press the
picture.
• You can press the ANGLE button to rotate direction of the picture
by 90°.
• Some discs may not permit this operation.

Customizing the Function Settings

Language Setup
button on the
1. Press the SETUP button on the
remote control or MENU button
on the unit in stop mode (when
disc is not playing).
2. Press the
Language Menu.
3. Press the /
the option (Player Menu, Audio, Subtitle or Disc Menu), then press
the button.
4. Press the /
the ENTER button to confirm.
5. Repeat steps 3 and 4 to adjust other options. Press the
return to the previous menu.
6. Press the SETUP or RETURN button to exit the menu.
Notes:
• Some DVDs may not play in the audio language you selected. A
prior language may be programmed on the disc.
• Some DVDs may be set to display subtitles in a language other
than the one you selected. A prior subtitle language may be
programmed on the disc.
• Some DVDs allow you to change subtitle selections using the disc
menu only. If this is the case, press the MENU button and choose
the appropriate subtitle language from the selection on the disc
menu.
• Some DVDs may not include your pre-selected language. In this
case, the DVD player automatically displays disc menus consistent
with the disc's initial language setting.
Video Setup
1. Press the SETUP button on the
remote control or MENU button
on the unit in stop mode (when
disc is not playing).
2. Press the /
Video Menu.
3. Press the /
the option (Brightness or Contrast), then press the button.
4. Press the /
button to confirm.
5. Repeat steps 3 and 4 to adjust other options. Press the
return to the previous menu.
6. Press the SETUP or RETURN button to exit the menu.
System Setup
button on the
1. Press the SETUP button on the remote control or MENU button on
the unit in stop mode (when disc is not playing).
2. Press the / button to select System Menu.
PLAY button
3. Press the /
then press the button.
PLAY button on the
button on the unit to resume picture slide show.
PREV or NEXT button to change the
Language
- - Language Menu - -
Player Menu
Audio
Subtitle
Disc Menu
button to select
Go To Language Menu
button to select
button to select your preferred language, then press
Language
- - Video Menu - -
Brightness
Contrast
button to select
Go To Video Menu To
button to select
button to adjust the setting, then press the ENTER
button to select the option (TV Display or Default),
button
Video System
Eng
Eng
Off
Eng
button to
Video System
00
00
button to
3/28/2011 10:31:05 AM