Viking FDB451 Option Installation Manual page 3

Door Panel Installation
For FDB451Model
The unit comes with everything needed to make installing the door panel easy.
What you will need:
Torx Driver
(T-15)
D
C
D
Plastic
Retainers
D3 Door Skin
4
(Purchased Separately)
#8 1-3/4" long, Stainless Steel
Truss Head Screw
(4 supplied)
Dishwasher Door
D
C
D
Installation
1
C
Plastic
Retainers
Position door skin on front of dishwasher
door. Snap the plastic retainers on the door
skin into the holes (C) on dishwasher door.
3
D
x4
D
Carefully tighten all four screws and check
to ensure that the panel is square with the
dishwasher door. Note: Verify the operation
of the door counterbalance springs after
installation of the door skin.
5
2
D
x4
D
D
While holding the door skin in position,
carefully open the dishwasher door. Using
the four truss head screws provided, secure
the door skin to the four holes (D) on the
dishwasher door.
W A R N I N G
The door skin must not obstruct the
fan exhaust vent.