Viking FDB451 Option Installation Manual page 2

Door Panel Installation
For FDW100 / FDW100WS Models
The unit comes with everything needed to make installing the door panel easy.
What you will need:
Phillips Head
Screwdriver
D
C
Plastic
Retainers
2
(Purchased Separately)
#8 1-1/2" long, Stainless Steel
Flat PHD Screw
(4 supplied)
Dishwasher Door
D
C
Installation
1
Plastic
Retainers
Remove plastic retainers from door panel
and discard.
3
C
D
C
x2
D
D
Carefully open the dishwasher door.
Remove the (2) white caps from holes (C)
and the (2) top screws from holes (D) on
dishwasher door
3
2
Remove plastic mounting brackets from the
dishwasher and discard.
4
C
D
x4
C
D
Carefully secure the door panel to the
dishwasher through holes (C) and (D) using
the four flat PHD screws provided. Carefully
tighten all four screws and check to ensure
that the panel is square with the dishwasher
door. Do not over tighten screws. This
may cause damage to the inner door.
Note: Verify the operation of the door
counterbalance springs after installation of the
door skin.
Note: Verify that the door does not hit the
kickplate. Adjust kickplate if necessary.