Troubleshooting
Problem
The telephone does
not rng when there s
an ncomng call.
Suggestion
•
Make sure the rnger s on (page 8).
•
Make sure the telephone lne cord and power adapter are plugged n properly (page 2).
•
The handset may be too far from the telephone base. Move t closer to the telephone base.
•
There may be too many extenson telephones on the telephone lne to allow all of them to rng
smultaneously. Try unpluggng some of them.
•
If the other telephones n your home are havng the same problem, the problem s n the wrng
or local servce. Contact the local telephone company (charges may apply).
•
Other electronc products can cause nterference to your cordless telephone. Try nstallng your
telephone as far away as possble from the followng electronc devces: wreless routers, rados,
rado towers, pager towers, cellular telephones, dgtal telephones, ntercoms, room montors,
televsons, VCRs, personal computers, ktchen applances, and other cordless telephones.
•
Test a workng telephone at the telephone jack. If another telephone has the same problem, the
problem s n the telephone jack. Contact your local telephone company (charges may apply).
•
The telephone lne cord mght be malfunctonng. Try nstallng a new telephone lne cord.
•
Remove and re-nsert the battery and place the handset n the telephone base.
•
Wat for the handset to synchronze wth the telephone base. Allow up to one mnute for ths
to take place.
www.vtechphones.com
35