Linking Enhancements - Nikon 25338 User Manual

68
the Batch Menu (either the Batch
Menu from the main window or the
Batch Menu within the Edit List).
The copied step or enhancement will be
placed after any current enhancements
in the Edit List have been applied.
You may also copy and paste the Base
Adjustments step. Due to the unique
nature of the Base Adjustments step,
any single image cannot have more
than one Base Adjustments step, nor
can it have more than one of any of the
adjustments located within the Base
Adjustments step. When you copy and
paste the Base Adjustments step, the
contents of Base Adjustments step that
already resides within the target image
will be replaced by the contents of
the Base Adjustments from the source
image. To prevent the entire Base
Adjustments step from being overwrit-
ten, select the individual enhancements
from within the Base Adjustments step
to copy and paste.

Linking Enhancements

Linking enhancements within the Edit
List enables you to apply the selective
controls that are used within one step
to more than one enhancement. By
default, each enhancement is applied to
a separate step. By linking two or more
enhancements together in the same
step, each of those enhancements can
benefit from the same selective controls
that were applied to that step.
To link enhancements, simply hold down
the Shift key while selecting another
enhancement from the main Menus.
Please note: You may link any
number of enhancements together within
the same step, but please note that the
greater the number of enhancements
that are applied within the same step, the
slower Capture NX may be in displaying
the results of any adjustments.
Step 1. Apply an enhancement to your image.
Step 2. Holding the shift key down, navigate to the Adjust
or Filter menu from the Menu Bar and select the enhance-
ment you want to link to the current step.
Step 3. The new enhancement will be linked to the current
step, providing you with two separate enhancements within
the same step.