Table of Contents
Advertisement
220
priority auto (A)
d) Aperture: choose the minimum
aperture (largest f/-number)
e) Focus: choose manual focus and set
focus to infinity
3) Take a photograph
With the lens about 4 inches (10 cm)
from a featureless white object, such as
a wall, frame the object so that it fills
the viewfinder and take a photograph.
The resulting Dust Off reference photo
will be recorded as an NEF (RAW) image.
4) Transfer the photograph to the
computer
Creating Dust Off Ref
Photos (D1-Series and D100
Cameras)
In addition to D2-series, D200, D70S,
D70, and D50 cameras, Dust Off ref
photos can be taken with the D1X /
D1H (firmware version 1.10 or later),
and D100. Dust Off ref photos
cannot be created with the D1 or
with earlier versions of the camera
firmware for the D1X and D1H. Dust
Off ref photos taken with the D100,
D1X, or D1H have the extension
".nef"; do not change this extension.
Camera Shake
A slight amount of blurring caused by
camera shake will not affect Dust Off
ref photos.
Image Dust Off
Image Dust Off only affects relatively
featureless areas of the image.
Reusing Dust Off settings
Before pasting or loading Image Dust
Off settings for another image, be sure
that the image was created with the
same camera used to record the Image
Dust Off reference file. If the refer-
ence file was created with a different
camera, a warning will be displayed.
Vignette Control
Vignette control cannot be used to
correct vignetting caused by PC Nikkor
lenses or Speedlight photography.
Advertisement
Table of Contents
