Table of Contents
Advertisement
Flip
Use the Flip command to mirror the
image across one of two axes:
• Choose Horizontal to mirror the
image across the vertical axis.
• Choose Vertical to mirror the image
across the horizontal axis.
Original
Horizontal Flip
Rotate
With these commands you can rotate
your image 90 degrees clockwise
or counter-clockwise, or you can
straighten the image.
Original
Rotate Right
of the functionality of the rotate and
straighten features.
Size / Resolution
The Size / Resolution command changes
the size of your image, with control
over either redistributing the image
data or interpolating the image data.
Within the Size / Resolution dialog, you can
choose between one of two resize modes:
Change the Output Size (DPI)
Vertical Flip
Within this mode, you can adjust both
the resolution as well as the final
image size. The first parameter that
you change (either the resolution or
the final image size) will simply redis-
tribute the currently available pixels. If
you then choose to alter the remaining
parameter, Capture NX will interpolate
the image data using a bi-cubic inter-
polation method. In doing so, image
data is either created or discarded so
that the image fits within the newly set
parameters. To illustrate, if you first set
the resolution to 300 dpi, the image
height and width will automatically
update to redistribute the current
image pixels into an image set to
300 dpi. If you then change the image
height or width, the resolution will
remain at 300 dpi, and Capture NX will
Rotate Left
either create or remove new pixel infor-
Please see page 75 for a description
127
Advertisement
Table of Contents
