Table of Contents
Advertisement
156
Noise Reduction
The Noise Reduction feature enables
you to reduce the effects of digital
noise that sometimes appears in images
taken with digital cameras.
Please note
you zoom your image to 100% while
determining the amount of noise reduc-
tion to apply to your image.
INTENSITY
Start moving the Intensity slider to
the right to increase the amount noise
reduction being applied to your image.
Be careful to not apply too much noise
reduction, as high levels of noise reduc-
tion may cause loss of detail.
SHARPNESS
The Sharpness slider helps counter the
loss of detail that can occur at high
noise reduction levels. Move this slider
to the right to increase the amount
of sharpening that is applied to your
image.
METHODS
Choose between the Faster or Better
Quality methods in the Method
: It is recommended that
pull-down Menu. Select Faster for
faster processing or Better Quality for a
more precise noise reduction effect.
EDGE NOISE REDUCTION
When you check the Edge Noise
Reduction checkbox, Capture NX will
reduce noise artifacts around the edges
of objects within the image, resulting in
more distinct outlines.
Once you are satisfied with the results
of the Noise Reduction feature, click
the OK button. If you want to cancel
the Noise Reduction feature, simply
click the Cancel button.
Auto Red-Eye
The Auto Red-Eye feature within the
Adjust Menu differs from the Red-Eye
Control Point feature located within
the Toolbar.
Please see page 171
for more information on this feature.
The Auto Red-Eye feature automatically
locates and removes red-eye from the
current image.
The Auto Red-Eye effect is applied
immediately when the Auto Red-Eye
dialog is displayed. Click OK to accept
the Auto Red-Eye effect, or click cancel
to prevent the Auto Red-Eye effect from
changing your image.
Advertisement
Table of Contents
