Driver Installation - Dell 1800FP - UltraSharp - 18.1" LCD Monitor Quick Setup Manual

Display Controls and Indicators
A. Input selection button
B. Menu buttns
C. Up/Down arrow buttons
D. Left/Right arrow buttons
E. Select/Auto button
F. Power button and LED
indicator

Driver Installation

Use the display CD to install the appropriate display driver for your operating system.
   
Microsoft Windows
To manually install or update the driver, perform the following steps:
1. Insert the monitor CD into the CD-ROM drive.
2. Click Start
3. In the Display Properties window, click the Settings tab, and then click Advanced.
4. Click the Monitor tab, and then click Properties
5. When the Hardware Update Wizard dialog box appears, choose "Install the software automatically,"
and click Next> and then Finish to complete the installation.
6. Close the Display Properties window.
   
Microsoft Windows
To manually install or update the driver, perform the following steps:
1. Click Start
2. In the Display Properties window, click the Settings tab, and then click Advanced.
3. Click the Monitor tab, and then click Change
4. When the Update Device Driver Wizard dialog box appears, select "Display a list of all the drivers in a
specific location, so you can select the driver you want," and click Next>.
5. Insert the display CD into the CD-ROM drive, then click Have Disk...
6. Type d:\ (change the drive letter to match your CD-ROM drive if it is not drive D) in the Copy
manufacturer's files from: box, then click OK.
7. Click Next>, Next>, and then Finish to complete the installation.
8. Close the Display Properties window.
   
Microsoft Windows
To manually install or update the driver, perform the following steps:
1. Click Start
2. In the Display Properties window, click the Settings tab, and then click Advanced.
3. Click the Monitor tab, and then click Properties
4. When the Update Device Driver Wizard dialog box appears, choose "Search for a suitable driver for
my device," and click Next>.
2
Dell 1800FP Color Display Quick Setup Guide
A B
Use this button to make Dsub or DVI connector active. This feautre is used
when two computers are connected to the display. The default setting is Dsub.
Use this button to enter or exit the On Screen Display.
Select between OSD items and activates "Hot key" function for brightness
adjustment.
Use these buttons to choose or adjust items in the On Screen Display and activates
Hot Key function for contrast adjustment.
- Use this button to enter a selection in the On Screen Display.
- Automatically adjust vertical position, horizontal position, pixel clock and phase.
Turn the display on/off and indicate the status of power management.
   
XP Operating System
Control Panel Appearance & Themes and then click the Display icon.
   
Millennium Operating System
Settings Control Panel and then double-click Display.
   
2000 Operating System
Settings Control Panel and then double-click Display.
C D E F
Driver tab Update Driver.
Specify the location of the driver Next.
Driver Update Driver.