Adjusting The Screen Automatically; Osd Options - Honeywell MT-SY-HWLM1916 - Arius 19" Widescreen LCD Monitor Owner's Manual

Using the LCD Display (Continued)

Adjusting The Screen Automatically

At any time, while not in the OSD Menu, pressing the "AUTO" button on the control panel will
auto adjust the positioning, brightness, contrast and color of your display.
An "Auto Adjustment" message displayed for a few seconds until the adjustment finishes.
Note: Auto Adjustment function will be disabled under DVI mode, as in this mode, the screen
will be adjusted to the best visual result automatically and there is no need to make further
adjustment.
On Screen Display (OSD) Options
While in the OSD Menu, the following options are available:
Contrast - Adjust the light intensity between the brightest white and the darkest black
Brightness - Adjust the overall brightness of the display
Horizontal Position - Horizontally adjust the screen's position
Vertical Position - Vertically adjust the screen's position
OSD Horizontal Position - Horizontally adjust the OSD Menu position
OSD Vertical Position - Vertically adjust the OSD Menu Position
Phase Adjustment - Adjust to correct vertical dark bands
Clock Adjustment - Adjust to correct horizontal streaking
Volume - Increase or decrease the maximum volume of the built-in speakers*
Input Selection - Changes between the VGA and DVI source
Color Adjustment - Select preset color temperatures or manually adjust the colors
Language - Change the OSD Menu language to Chinese, English, French, German, Italian or
Spanish
Reset - Reset all settings back to the default settings
Exit - Exit the OSD Menu
*Adjust with Operating Systems Master Volume Control for Desired Level
- 9 -