Port Adapter Slot Numbering - Cisco 7206VXR - VPN Bundle Router Supplementary Manual

Chapter 1 Cisco 7200 Series Port Adapter Installation Requirements

Port Adapter Slot Numbering

Figure 1-3
1
2
3
4
Figure 1-3
port adapter slot numbering for the Cisco 7200 VXR routers with the Port Adapter Jacket Card installed.
For the Cisco 7202, Cisco 7204, and Cisco 7206 routers, port adapters in odd-numbered slots connect to
PCI bus mb1 (left bus). Port adapters in even-numbered slots connect to PCI bus mb2 (right bus). The
I/O controller connects to PCI bus mb0 (left bus), port adapter slot 0. The I/O controller is considered
part of the left bus when calculating bandwidth points.
For the Cisco 7204VXR and Cisco 7206VXR routers, port adapters in odd-numbered slots connect to
PCI bus mb1 (left bus). Port adapters in even-numbered slots connect to PCI bus mb2 (right bus). The
I/O controller connects to PCI bus mb0 (left bus), port adapter slot 0. The I/O controller is considered
part of the left bus when calculating bandwidth points, except in the case of the NPE-G1 or NPE-G2.
With the NPE-G1 or NPE-G2 installed, the I/O controller connects on the third PCI bus, mb0, which
connects directly into the NPE-G1 or NPE-G2, and so does not use bandwidth points.
The NPE-G1 and NPE-G2 installs only in the Cisco 7204VXR and Cisco 7206VXR routers.
Note
OL-3875-11
Cisco 7200 Series Port Adapter Slot Numbering—Cisco 7206 Shown
Cisco 7200
Series
2
3
4
Blank port adapter
Port adapter slot 5 (left bus—mb1)
Port adapter slot 3 (left bus—mb1)
Port adapter slot 1 ((left bus—mb1)
shows the port adapter slot numbering for the Cisco 7200 series routers.
1
5
5 Port adapter slot 0
6
Port adapter slot 6 (right bus—mb2)
7 Port adapter slot 4 (right bus—mb2)
8 Port adapter slot 2 (right bus—mb2)
Cisco 7200 Series Port Adapter Hardware Configuration Guidelines
Configuration Guidelines and Requirements
6
7
8
ETHERNET-10BFL
FAST ETHERNET INPUT/OUTPUT CONTROLLER
Figure 1-4 shows the
1-5