TP-Link M5350 User Manual page 37

Restore to Factory Defaults: Click Restore to reset all configuration settings to their

default values. All of the settings you have saved will be lost when the default settings are
restored.
You can restore the following factory default values:
The default User Name: admin
•
The default Password: admin
•
The default IP Address: 192.168.0.1
•
The default Subnet Mask: 255.255.255.0
•
4.4.4.3. Modify Password
It is strongly recommended that you change the factory default password of the device.
Old Password: The old password that is used to log in the device.

New Password: The new password you want to set for the login of the device.

Confirm New Password: Enter the new password again for confirmation.

Click Save when you finish the setting.
Click Clear to clear all the values you have already set, and then you can reset it.

Note:
The new password must not exceed 14 characters in length and not include any spaces.
Figure 4-29 Modify Password
-30-
M5350 3G Mobile Wi-Fi User Guide