TP-Link M5350 User Manual page 32

Wi-Fi off time: If no clients connect to the device's wireless network in a period of time (15

minutes by default), the Wi-Fi will be shut down. You can press the power button to resume
the Wi-Fi.
Click Save to save your settings.
4.4.2.2. MAC Filter
The Wireless MAC Address Filtering feature allows you to control the wireless stations
accessing the device, which depends on the station's MAC addresses. MAC Address is the
physical address of the wireless stations, usually in the format of XX-XX-XX-XX-XX-XX format
(X is any hexadecimal digit).
Wireless MAC Filter: Select to Enable or Disable the MAC filter function of the device. The

below settings will take effect only when you select Enable.
MAC Address List: A List of MAC addresses will be allowed to access the device.

Your MAC: Displays the MAC address of your client(s) currently wirelessly connected to

the device.
Click Save to save your settings.
4.4.2.3. Wi-Fi Status
The Wi-Fi Status page displays the basic information about the Wi-Fi client(s) that are currently
connected to the device.
Figure 4-21 Wireless MAC Filter
-25-
M5350 3G Mobile Wi-Fi User Guide