Haier LTF47K1a User Manual page 9

KNOW YOUR MACHINE
F Vol -: Press to decrease the Volume. In Menu mode, press to decrease a set-
ting.
G CH +: Press to go to the next higher channel. In Menu mode, functions as the
up arrow.
H CH -: Press to go to the next lower channel. In Menu mode, functions as the
down arrow.
Power Button: Use this button to switch your LCD TV on/off.
I
J Common Interface Slot: Function when PC Card or ExpressCard is in COM-
MON INTERFACE slot of the set. Please refer to your plug-in card manual for
detail information.
K / L AV input: connect the VIDEO recorders or DVD players with standard com-
posite output and audio output signal.
M S-video Input: Connect the video for a S-Video device to this jack, and com-
patible with composite/audio input.
N USB Input: This TV set can support Multi media input for .MP3 and .JPEG file.
O Headphone Output: Connect to headphones (32Ω).
P HDMI Input: High Definition Multimedia Interface. Connect to devices with
digital signals and can be used with PC or HDTV video signals.
Q VGA Input: Connect to VGA analog signals sources.
R Component Input: The YPbPr video signal can be used if connecting through
the component video port. For example Progressive Scan DVD players,
Hiscale HDTV Decoders, and satellite receivers, obtain video with maximum
resolution using YPbPr and L/R audio signals.
S SPDIF: SPDIF is highly recommended for high quality digital sound output.
T Antenna Input: Connects to TV RF signals (antenna/CATV).
U SCART: The left one is Full SCART with transmits RGB,S-Video and CVBS in
and CVBS tuner out,the right one is half SCART which transmits S-Video or
CVBS in and CVBS monitor out.
V Power Connector: Connect the power cord into the AC IN socket found at the
back of the TV.
W PC Audio Input: PC audio supports 3.5mm Jack.
X HDMI Input: High Definition Multimedia Interface. Connect to devices with
digital signals and can be used with PC or HDTV video signals.
| HD Ready LCDTV | User Manual |
p.07