Related Manuals for Haier LTF47K1a
Summary of Contents for Haier LTF47K1a
- Page 1 LCD TV RECEIVER USER’S MANUAL MODEL: LT26K1,LT32K1 LTF37K1, LTF42K1 Please read this manual carefully before LTF47K1 using your television and keep this manual In a good place for future reference.
-
Page 2: Table Of Contents
CONTENTS IMPORTANT SAFETY INSTRUCTIONS............p.01 REMOTE CONTROL..................p.03 KNOW YOUR MACHINE................p.06 WALL MOUNTING..................p.08 ANTENNA CONNECTION................p.10 TUNING MENU OPTIONS................p.11 OTHER CONNECTIONS................p.13 BASIC OPERATION..................p.18 MENU OPERATION..................p.22 TELETEXT...................... p.35 COMMON INTERFACE MODULE..............p.37 OAD OPERATION..................p.39 TROUBLESHOOTING.................. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read all instruction before use and keep for future reference. WARNING • Misuse or modification of this appliance may result in breakdown or injury. • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. IMPORTANT INFORMATION • The appliance is intended for household use only. • The appliance should always be turned to OFF before plugging or unplugging from socket. Never yank cord to disconnect from socket; instead, grasp plug and pull to disconnect. • Check that the Voltage on the rating plate of your product corresponds with your local electricity sup- ply which must be A.C. (Alternating Current). - Page 4 IMPORTANT SAFETY INSTRUCTIONS Read all instruction before use and keep for future reference. FOR SAFETY DO NOT: • Attempt to disassemble this unit or carry out repairs. • Attempt to modify the unit in any way. • Make sure that foreign objects do not get inside the unit. • Place naked flame sources - such as lit candles on or near the unit. • Place objects filled with liquids - such as vases, on or next to the unit. • Cover the unit - allow the unit to be well ventilated. • Drop the unit or subject it to strong shocks. • Attempt to service this product yourself as opening or removing covers may expose you to danger- ous Voltage or other hazards. Refer all servicing to qualified service personnel.
-
Page 5: Remote Control
REMOTE CONTROL POWER SOURCE Numerical Keys PRE CH VIDEO YPbPr HDMI MUTE Vol + - YPbPr VIDEO ADJ AUDIO ADJ SLEEP DUAL DUAL ZOOM CURSOR INFO MENU MENU/EXIT INFO /EXIT Yellow Button Green Button Blue Button Red Button SIZE CH-LIST USB FREEZE SUBPAGE TELETEXT... - Page 6 REMOTE CONTROL NOTES: Please read the important safety instructions before use. fig. 1 REMOTE CONTROL 1. Unclip the Battery Cover from the Remote Con- trol. See fig. 1. 2. Insert two new 1.5V size AAA Batteries with the + and – marks correctly aligned. See fig. 2. Battery Compartment HANDLING THE REMOTE CONTROL Cover...
- Page 7 REMOTE CONTROL 3. Carefully close the Battery Cover. See fig. 3. PRECAUTIONS: To obtain the best performance from your fig. 3 remote control, please consider the follow- ing: • Ensure there is no obstruction between remote control and TV set. • Bright sunlight may affect the remote control performance. • Always ensure that both batteries are replaced at the same time.
-
Page 8: Know Your Machine
KNOW YOUR MACHINE 1 x LCD TV Front View Side Connections Control Panel Rear View Rear Connections A Power LED: If the LED color is Blue, means the TV set is power on. If the LED color is Red, which means this TV set is in standby mode. B Wall Mount Hole: For wall mount use only. C Source: Use this button to toggle between video input sources. D MENU: Press to open the on-screen menu. E Vol +: Press to increase the Volume. In Menu mode, functions as the right ar- row to go to the next menu or increase a setting. - Page 9 KNOW YOUR MACHINE F Vol -: Press to decrease the Volume. In Menu mode, press to decrease a set- ting. G CH +: Press to go to the next higher channel. In Menu mode, functions as the up arrow. H CH -: Press to go to the next lower channel. In Menu mode, functions as the down arrow. Power Button: Use this button to switch your LCD TV on/off. J Common Interface Slot: Function when PC Card or ExpressCard is in COM- MON INTERFACE slot of the set. Please refer to your plug-in card manual for detail information.
-
Page 10: Wall Mounting
WALL MOUNTING NOTES: Please read the important safety instructions before use. WALL MOUNTING (Optional) IMPORTANT: When drilling into walls always check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs supplied are suitable for supporting the unit. - Page 11 WALL MOUNTING fig. 7 2. Use 4 Wall Mount Holes B and Screws (not included) to mount the TV on the Bracket (not included). See fig. 8. fig. 8 3. For the Wall Bracket - Refer to the user instructions supplied with the wall brack- et (not included). See fig. 9 VESA-Compatible TV Screen Wall bracket Screw Type Size (inches) (W x H mm) 26” 200 x 100 mm Metric 4 x 12 mm 32”...
-
Page 12: Antenna Connection
ANTENNA CONNECTION WARNING: Switch off the TV before connecting any external device. fig. 10 CONNECTING THE ANTENNA 1. Connect the Antenna Plug to the Antenna Input T located at the rear of the TV. See fig. 10. 2. For optimum picture quality, adjust antenna direction if needed. 3. -
Page 13: Tuning Menu Options
TUNING MENU OPTIONS TURN ON THE LCD-TV 1. When the POWER I is pressed, the TV will be turned on and the Power LED A on the front of the TV will change from red to blue. See fig. 11. 2. When the LCD-TV is turned off, using the POWER I , the LCD-TV will go into standby mode and the Power LED A will turn to red. -
Page 14: See Fig
TUNING MENU OPTIONS 3. Use Up or Down Cursor to select your language. Then press Right Cursor or OK Button to con- tinue. MENU INFO See fig. 14, 15. /EXIT fig. 14 Initial Setup Language Please select your language: English Deutsch 4. Use Up or Down Cursor to select Français Italiano your country. -
Page 15: Other Connections
OTHER CONNECTIONS WARNING: Switch off the TV before connecting any external device. SCART INPUT To connect external devices such SCART1 as DVD players, set top boxes or SCART 2 games consoles. fig. 20 1. Plug the scart lead from the SCART Lead external device into TV SCART Socket U . See fig. 20. 2. SCART 1 - Full SCART, which transmits RGB, S-Video and CVBS in and CVBS tuner out. - Page 16 OTHER CONNECTIONS YPbPr INPUT For connecting devices such as video cameras. 1. Make sure that the power of the LCD-TV and the AV device are off. 2. Connect the (Y, Pb, Pr) cables and audio cables to the Compo- nent and Audio Input R on the See fig. 22. fig. 22 3.
- Page 17 OTHER CONNECTIONS VGA INPUT You can use your LCD-TV as a monitor for your personal computer. 1. Connect the D type 15-pin VGA interfacecable (not supplied) to VGA Input Q on the LCD-TV. See fig. 24. 2. Connect the audio cable (not sup- plied) to Audio Input W on the back fig. 24 of the LCD-TV (if necessary). See fig.
- Page 18 OTHER CONNECTIONS AV INPUT For connecting an AV device. 1. Make sure that the power of the LCDTV and the AV device are off. 2. Connect the audio cables from the AV device’s output jacks to the Audio Input K . See fig. 26. 3. Connect the video cables from the AV device’s output jacks to the Video Input L .
- Page 19 OTHER CONNECTIONS COMMON INTERFACE SLOT You can use a Conditional Access Mod- ule (CAM) card to view a Pay TV. 1. Insert the CAM card (not included) in Common Interface Slot J . See fig. 28. 2. Please refer to the COMMON INTER- FACE section for more detailed informa- tion. HEADPHONE OUTPUT 1. Connect a set of stereo headphones (not included) to the Headphone Output O for private listening.
-
Page 20: Basic Operation
BASIC OPERATION SELECT SOURCE • Press the POWER to turn on the LCD-TV. Then press HDMI , YPbPr , VIDEO , PC SOURCE to select the source. See fig. 29. AUDIO CONTROL YPbPr • Press the Vol+ to increase the Volume or Vol- to decrease the Volume. A number will appear on... - Page 21 BASIC OPERATION AUDIO ADJ • Press AUDIO ADJ to set the LCD TV to a predefined sound setting. Music/ Speech/ Personal. See fig. 30. SELECT TV CHANNEL • You can use the Number Keys YPbPr the remote control to directly select TV channels. Enter the channel number you want to watch, the keys must be pressed within 3 seconds.
- Page 22 BASIC OPERATION • Press EPG to display electronic program guide in TV mode. See fig. 31. CHANNEL LIST • Press CH-LIST to display a list of channels. YPbPr See fig. 31. SLEEP • Press SLEEP to turn the LCD TV off after a preset time.
- Page 23 BASIC OPERATION FAVOURITE LIST • Press FAV to display the Favourite list. You can save your favourite channels in the Favou- CH-LIST USB FREEZE rite List. See fig. 32. SUBTITLE fig. 32 • Press SUBTITLE to turn the subtitle On or Off. See fig. 32. •...
-
Page 24: Menu Operation
MENU OPERATION OSD SETTING 1. Press MENU D or to enter the fig. 33 OSD setting. There are five items in the list: Picture, Sound, TV, Features and Parental. YPbPr fig. 34 See fig. 33, 34 and 35. 2. Use the Up or Down Cursor DUAL select and press OK to confirm your choice. -
Page 25: Smart Picture
MENU OPERATION Picture Smart Picture Picture Smart Picture Standard Brightness Sound - To set the LCD TV to a predefined picture Contrast Colour settings. Use the Left or Right Cursor Tint Features Sharpness select from Standard, Vivid, Movie, Eco, or Parental Colour Temperature Cool Advanced Control Personal. See fig. 36 and 37. Enter Select Exit... -
Page 26: Sound Mode
MENU OPERATION Backlight To make the background brighter or Picture Sound Mode Personal darker.See fig. 36-1. Equalizer 120Hz Sound Equalizer 500Hz DCR. Equalizer 1.5KHz Equalizer 5KHz Dynamic Contrast Ratio (DCR) auto Features Equalizer 10KHz adjusts the brightness of the screen Balance Parental Virtual Surround to show more depths in the darker Digital Audio Out areas.See fig. 36-1. Enter Select Exit... - Page 27 MENU OPERATION Digital Audio Out To select the Digital audio out. Use the Left or Right Cursor toggle between Off, Dolby Digital and PCM. Tip: When Dolby Digital is select- ed, make sure the amplifier sup- ports digital audio.See fig. 38. SPDIF Delay The NorDig HD IRD shall support the possibility to adjust the audio-delay on the SPDIF output (if available) up to 250 ms and it should be adjustable...
-
Page 28: Audio Description
MENU OPERATION The following functions are only avail- able for digital channels with audio Picture signals. SPDIF Delay Sound Type Normal Audio Description Type Features Parental This function enables you to choose the type of the additional narration Select Back during the TV watching. EXIT fig. 40 Use the Left or Right Cursor toggle between Normal, Hard of Hearing, or Audio Description. -
Page 29: Channel Scan
MENU OPERATION Country Picture Country Germany 1st Audio English Sound 2nd Audio English To select the relevant country. Channels This is the country you are in, or the Features country whose channels you want to Parental receive if you live near its borders. See fig. 42. Enter Select Exit... -
Page 30: Update Scan
MENU OPERATION Update Scan 1. Use the Up or Down Cursor Picture Scan single RF channel.(Digital Only) select Update scan in the Chan- Sound nels submenu. Features 2. Press the Right Cursor to start RF Channel Parental Signal Strength searching the local program auto- Signal Quality Good matically. -
Page 31: Channel Sort
MENU OPERATION Channel Sort 1. Use the Up or Down Cursor select Channel sort in the Chan- nels menu. 2. Press the Right Cursor to enter MENU INFO it and use the Up or Down Cursor /EXIT to highlight a program you want to sort and press the OK to set. 3. Use the Up or Down Cursor highlight the second program you want to exchange with and press CH-LIST USB FREEZE... - Page 32 MENU OPERATION Decoder (Analog only) Channel Decode support the Canal+ (paid television channel); however, the channel also broad- cast some un-encrypted programs. These programs without encryption can be viewed free of charge. 1. Use the Up or Down Cursor to select Decoder in the Chan- nels submenu. 2. Use Up or Down Cursor highlight the channel and press to set. Analog Ch Fine Tune 1. Use the Up or Down Cursor to select Analog C Fine Tune in the Channels submenu.
-
Page 33: Picture Format
MENU OPERATION Features Menu Language Picture Menu Language English Picture Format Wide Sound To select the on-screen display Time Features Subtitle menu language. Teletext Language Parental Common Interface See fig. 50 and 51. HDMI Scan Info Auto Reset Default Picture Format Select Exit EXIT... -
Page 34: Teletext Language
MENU OPERATION Subtitle - Use the Up or Down Cursor Picture Menu Language English Picture Format Wide toggle between : Sound Time Features Subtitle • Analog Subtitle: To display Teletext Language Parental Common Interface the transmitted subtitle on the HDMI Scan Info Auto Reset Default screen. This text can either be permanently displayed (assuming Select Exit EXIT... - Page 35 MENU OPERATION HDMI Scan Info (HDMI only): When you use HDMI mode, you can choice the follow mode.See fig. 53. Automatic: Set to underscan or overscan automatically when the video signal is detected. Underscan: When the video signal is detected, all active pixels and lines are displayed with or without border. Overscan: When the video signal is detected, some active pixels and lines at the edges are not displayed.
-
Page 36: Channel Block
MENU OPERATION Parental This function blocks channels or pro- Picture Channel Block grams that you do not want to or that Parental Guidance Sound Input Block you do not want your children to watch. Set Password Clear All A password is required to gain access to Features this function. The factory default pass- Parental word is “0000”. Enter Select Back EXIT Channel Block fig. 56 To block certain channels that you do not want to or that you do not want your children to watch. -
Page 37: Teletext
TELETEXT TELETEXT - (Designed for Europe PAL/SECAM/ DVB-T systems only) TELETEXT Press TELETEXT to activate Teletext. Press again to turn off Teletext. See fig. 58. Press MIX to activate Teletext overlaying the TV picture. MENU See fig. 58. INFO /EXIT SIZE Press SIZE to change the screen size: Full screen, Top half and Bot- tom half. - Page 38 TELETEXT HOLD Press HOLD to stop the scrolling of tinue pages, press again to con See fig. 59. REVEAL MENU Press REVEAL to display hidden INFO /EXIT information such as answers to a quiz and MHEG CANCEL function. See fig. 59. R/G/Y/B (Colour button) Press Colour Buttons , and CH-LIST USB FREEZE to select from on screen options,...
-
Page 39: Common Interface Module
COMMON INTERFACE MODULE Common Interface Module Smart Card The Common Interface CI Slot J , is designed to accept the Condi- tional Access CA Module coupled with a Smart card, in order to view CA Module pay TV programmes and additional fig. 60 services. Contact your Common Interface service provider for further information about modules and sub- scription options. - Page 40 COMMON INTERFACE MODULE 3. Select Common Interface to view the menu options and information Picture on the inserted CI card. Menu Language English Picture Format Wide Sound See fig. 64. Time Subtitle Teletext Language Features Common Interface Parental Reset Default Enter Select Exit EXIT fig.
-
Page 41: Oad Operation
OAD OPERATION OAD for Software Update function: Over Air Download Software ID : XXXXXXXX A New Version of software is detected.Do you want to upgrade 1. When you get the updating news from the TV shop’s web, you can update the operation software using the Download menu. The data Accept Remind me Later for various units are transferred consecutively Select Next fig. 68 on a special receiving channel. -
Page 42: Troubleshooting
TROUBLESHOOTING The following table contains common problems and the solutions to these prob- lems. Please check this list before you contact technicians. Problems Sloutions No picture 1. Connect power cord correctly. 2. Turn on power. 3. Connect signal cable correctly. 4. Press any button on the LCD TV. Abnormal colours Connect signal cable correctly. Twisted picture 1. Connect signal cable correctly. 2. -
Page 43: Specifications
SPECIFICATIONS Model No. LT26K1 LT32K1 LTF37K1 LTF42K1 LTF47K1 DISPLAY Aspect Ratio 16:9 16:9 16:9 16:9 16:9 Resolution 1366 x 768 1366 x 768 1920 x 1080 1920 x 1080 1920 x 1080 ENHANCEMENT Sound Output (RMS 2x10 W 2x10 W 2x10 W 2x10 W 2x10 W Watts) Sound Mode Personal, Music, speech Picture Auto, Normal, Wide, Zoom 1, Zoom 2, Native(only in HDMI mode) Formats Picture Mode Standard, Vivid, Movie, Eco, Personal CONNECTIONS Tuner input (75Ω) -
Page 44: Appendix
APPENDIX (1) VGA support format 26"/32" 37"/42"/47" Item H .Freq. (KHz) M ode R esolution V.Freq. (Hz) 1 366x768 1 920x1080 31.469 IBM VGA 640x350 70.086 31.469 IBM VGA 720x400 70.087 31.469 IBM VGA 640x480 59.94 V 35 M ACINTOSH 640x480 6 37.861 VESA 640x480 72.809... - Page 45 APPENDIX HDMI (High Definition Multimedia Interface) support format Support 480i /480p, 576i/576p, 720p, 1080i, 1080p format with HDCP. Digital interface with 4 channels TMDS signal. Scart input/output description Scart1:SCART input / output -Full SCART, includes RGB in , CVBS ( audio L/R ) in/ ( TV out ). Scart 2:Scart input/output -Half SCART, includes S-Video in , CVBS( audio L/R ) in/ ( Monitor out ) Screen Display Source TV Source SCART 1 Out SCART 2 Out HDMI/VGA/Component --/--/Component HDMI/VGA/Component --/--/-- p.43 | HD Ready LCDTV | User Manual |...
-
Page 46: Information
INFORMATION CE marking p.44 | HD Ready LCDTV | User Manual |... - Page 47 Notes p.45 | HD Ready LCDTV | User Manual |...
- Page 49 Q41G2601672 3A...