Brother PE500 Operation Manual page 85

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
No
9
10
11
12
13
14
15
16
17
Error Message
You pressed the back key or the embroidery key when a pattern was
selected.
You tried to select an embroidery pattern or change the layout when
the needle was down.
The machine is turned on while the needle is lowered and the
embroidery unit is attached.
You tried to initialize the embroidery unit with the embroidery foot
lowered.
When 13 or more patterns are in "Removable Disk", a pattern was
being retrieved.
The start/stop button was pressed after selecting a pattern which is
saved in the machine's memory or entered from the USB port without
pressing
The needle position button or thread cutter button was pressed while
the bobbin winder shaft is moved to the right.
A pattern is being saved.
The start/stop button was pressed when no pattern is selected.
Bobbin thread has run out.
Little bobbin thread remains.
Probable Cause
(Retrieve key).
Troubleshooting 83
3