Winding/Installing The Bobbin; Bobbin Precautions; Winding The Bobbin - Brother PE500 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Winding/Installing the Bobbin

This section describes how to wind the thread onto the bobbin, and then insert the bobbin thread.

Bobbin precautions

Be sure to observe the following precautions concerning the bobbin.
CAUTION
● Only use the Bobbin (part code: SA156, SFB (XA5539-151)) designed specifically for this
machine. Use of any other bobbin may result in injuries or damage to the machine.
● The included bobbin was designed specifically for this machine. If bobbins from other models
are used, the machine will not operate correctly. Use only the included bobbin or bobbins of
the same type (part code: SA156, SFB (XA5539-151)).

Winding the bobbin

Wind the thread around the bobbin to prepare the bobbin thread.
a Bobbin-winding thread guide
b Bobbin winder shaft
c Bobbin
Memo
Use embroidery bobbin thread intended for this machine to get attractive finishes. If you use other
threads, the pattern may not turn out correctly. For details, refer to "Optional accessories" (page 9).
11.5 mm
(7/16 inch)
a
Actual size
Other model
This model
b
c

Winding/Installing the Bobbin 29

1