HP StorageWorks 7110 - Virtual Array Manual page 4

rbld -p
-a {on | off}
recover
No options
-s
secure -R
-e
-d
log
No options
-p <number of most recent events to display>
The log command ignores the row settings. If row setting
is less than 25, log command will set it to 25. In any case,
the row setting will be ignored when dispalying logs.
scsi -cdb <cdblen> <cdb bytes...> <direction> [ -cdbcrc <cdb
crc>]
[ -lun <lunId> ]
[ -data <data len> <data bytes...> [ -datacrc <data crc> ] ]
-p: Displays status/progress of a
subsystem rebuild.
-a: enables or disables autorebuild
Perform a recover process. Will ask for
user's verification to proceed.
-s: returns the recoverability status or
the disk array, as well as the status of
the recovery progress.
-R: Resets the password to AUTORAID.
-e: enables security.
-d: disables security.
No options displays all events in buffer.
-p: display a given number of most
recent events.
direction can be: nodata | datain |
dataout
Documentation about this interface is
available upon request.