Table of Contents
Advertisement
BUTTON SEWING
23
For attaching buttons
1. Raise the presser foot lever and slide the feed dog adjust-
ment lever to the right in order to lower the feed dog.
1 Feed dog adjustment lever (Slide off the accessory com-
partment to expose the lever.)
1
2. Attach button fitting foot "M", place the button into the presser
5
foot, and then lower the presser foot.
6
3. Turn the balance wheel to check that the needle goes into
5
each of the holes in the button correctly, and then start sew-
ing. To adjust the button sewing stitch width, touch the stitch
width keys "
sewing machine will stop automatically when the sewing is
finished.
6
*
If extra attachment strength is needed, carry out the button
sewing operation twice.
4. Once sewing is completed, return the feed dogs to their origi-
nal position, pull on the bobbin thread at the end of the stitches
to pull the upper thread through to the reverse side of the fab-
ric, then tie the thread ends together.
" or "
" to select the desired width. The
M
55
Hide quick links:
Advertisement
Table of Contents
