Overcasting Stitches; Sewing Using Stitch , Or; Sewing Using Stitch - Brother PC-3000 Operation Manual

OVERCASTING STITCHES

05 06
07

Sewing using stitch

6
Sewing using stitch
38
08
09
06
07 08
, or
Sew the fabric with the fabric edge against the guide of presser
5
foot "G".
1 Guide
* Before sewing, touch the automatic reinforcement stitching
key to sew reinforcement stitches automatically at the begin-
ning and at the end of the stitch.
1
CAUTION
After the stitch width has been adjusted,
turn the balance wheel by hand and check
that the needle does not touch the presser
foot.
If it does touch, the needle may break and
cause an injury.
09
05
or
Attach presser foot "J" and let the needle drop slightly past the
edge of the fabric before starting sewing.
* Before sewing, touch the automatic reinforcement stitching
key to sew reinforcement stitches automatically at the begin-
ning and at the end of the stitch.
05: For stretch fabric
06: For thin and medium fabric
07: For thick fabric
08: For medium, thick and easily frayed fabric
09: For stretch fabric
G
J
G