Attaching buttons with four holes
Attaching a shank to the button
6
56
First, sew the two holes which are closest to you. Once they have
been sewn, raise the presser foot, move the needle to the other
two holes, and then sew them in the same way.
1. Pull the shank lever toward you, then start sewing.
1 Shank lever
1
2. Hold the two ends of the upper thread, which are between the
button and the fabric, wind them around the shank, and then
securely tie them together.
3. Tie the ends of the bobbin thread together at the reverse side
of the fabric.