HP Compaq Elite 8300 Series Reference Manual page 52

7. Insert the hard drive into the bay as follows:
CAUTION:
of unnecessary force when installing any drive into the drive bay may result in damage to the
drive.
●
If you are installing a hard drive into one of the lower two bays (bays 5 and 6), slide the
hard drive into the drive bay until it locks. The drivelock automatically secures the drive in
the bay.
Figure 2-30
●
If you are installing a hard drive into the upper bay (bay 4), slide the hard drive into the
drive bay (1) then secure the drive in place with a standard 6-32 screw (2).
Figure 2-31
44 Chapter 2 Convertible Minitower (CMT) Hardware Upgrades
Make sure the guide screws line up with the guide slots in the drive cage. The use
Installing a Hard Drive into the Lower Two Bays
Installing a Hard Drive into the Upper Bay