Changing A User Or Supervisor Password - HP Dx5150 - Compaq Business Desktop Management Manual

Changing a User or Supervisor Password

✎
✎
Desktop Management Guide
If the system is equipped with an embedded security device, refer to
HP ProtectTools Embedded Security Guide, on the Documentation
CD.
1. Turn on or restart the computer. If you are in Windows, click
Start > Shut Down > Restart the Computer.
2. When the Enter Password box appears, type the current User
password, if a password is required.
Enter
3. Press .
4. Press and hold the
Enter
to bypass the title screen, if necessary.
If you do not press the
restart the computer and press and hold the
the utility.
If you are using a PS/2 keyboard, you may see a Keyboard Error
message—disregard it.
5. When the Enter Password box appears to access Computer
Setup, type the current Supervisor password, if required.
6. Press Enter.
7. Select either Set Supervisor Password or Set User Password.
8. When the Enter Password box appears on the screen, type the
new password and press
9. Before exiting, click File > Save Changes and Exit.
To delete a password instead of changing it, when the Enter
Password box appears on the screen, press
the new password. This deletes the current password.
www.hp.com
F10
key until you enter Computer Setup. Press
F10
key at the appropriate time, you must
Enter
.
Desktop Management Guide
F10
key again to access
Enter
instead of entering
23