Unsupported Usb Flash Media Device - HP Dx5150 - Compaq Business Desktop Management Manual

✎
Ä
Ä
Desktop Management Guide
12. Copy any files you saved in step 9 back to your USB flash media
device.
13. Remove the diskette and reboot the computer. The computer will
boot to the USB flash media device as drive C.
The default boot order varies from computer to computer, and it can
be changed in the Computer Setup (F10) Utility.
If you have used a DOS version from Windows 9x, you may see a
brief Windows logo screen. If you do not want this screen, add a
zero-length file named LOGO.SYS to the root directory of the USB
flash media device.

Unsupported USB Flash Media Device

CAUTION: Not all computers can be booted from a USB flash media
device. If the default boot order in the Computer Setup (F10) Utility lists
the USB device before the hard drive, the computer can be booted from a
USB flash media device. Otherwise, a bootable diskette must be used.
To create a bootable USB flash media device, you must have:
■
an HP Business Desktop dx5150 Series - Microtower, Small
Form Factor or Slim Tower.
Depending on the individual BIOS, future systems may also
support booting to a USB flash media device.
■
A bootable DOS diskette with the FDISK and SYS programs. If
SYS is not available, FORMAT may be used, but all existing files
on the USB flash media device will be lost.
1. If there are any PCI cards in the system that have SCSI, ATA
RAID or SATA drives attached, turn off the computer and unplug
the power cord.
CAUTION: The power cord MUST be unplugged.
2. Open the computer and remove the PCI cards.
www.hp.com
Desktop Management Guide
13