Panasonic KX-TG7875S Operating Instructions Manual page 73

Problem
The caller list/incoming phone
numbers are not edited
automatically.
I cannot dial the phone number
edited in the caller list.
Time on the unit has shifted.
The 2nd caller's information is
not displayed during an outside
call.
Using Bluetooth devices
Problem
I cannot copy phonebook
entries from a cellular phone.
I cannot have a conversation
using the headset.
Noise is heard during a call on
the headset.
For assistance, please visit http://www.panasonic.com/help
Cause/solution
R The Caller ID number auto edit feature is turned off. Turn
it on and try again (page 40, 43).
R You need to call back the edited number to activate Caller
ID number auto edit.
R The phone number you dialed might have been edited
incorrectly (for example, the long distance "1" or the area
code is missing). Edit the phone number with another
pattern (page 50).
R Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to
"Manual" (off) (page 40).
R In order to use Caller ID, call waiting, or Call Waiting
Caller ID (CWID), you must first contact your service
provider/telephone company and subscribe to the desired
service.
After subscribing, you may need to contact your service
provider/telephone company again to activate this specific
service, even if you already subscribed to both Caller ID
and Call Waiting with Caller ID services (CWID).
Cause/solution
R Confirm that the cellular phone supports Bluetooth
wireless technology.
R Confirm that the cellular phone supports the Phone Book
Access Profile (PBAP) or Object Push Profile (OPP)
specification.
R If the cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from the cellular phone.
R Someone is using a cellular line or headset. Try again
later.
R Turn the cellular phone off, then turn it on and try again.
R If an entry is already stored in the unit's shared
phonebook, the entry cannot be copied even by selecting
another group.
R Your Bluetooth headset is not paired. Pair it (page 54).
R Turn your headset off, then turn it on and try again.
R A Bluetooth headset can communicate with the base unit
within a range of approximately 10 m (33 feet). The
connection may be subject to interference from
obstructions such as walls or electronic devices. Move
closer to the base unit.
Useful Information
73