Panasonic KX-TG7875S Operating Instructions Manual page 23

*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
R The base unit user can take the call by
pressing MCELL 1N or MCELL 2N.
To release hold on the landline:
Press M N.
R Another handset user can take the call
by pressing M
R The base unit user can take the call by
pressing MZN.
Note:
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound.
After 1 additional minute on hold, the call is
disconnected.
R If another phone is connected to the same
line, you can also take the landline call by
lifting its handset.
Mute
While mute is turned on, you can hear the
other party, but the other party cannot hear
you.
1
Press MMUTEN during conversation.
R MMUTEN flashes.
2
To return to the conversation, press
MMUTEN again.
Note:
R MMUTEN is a soft key visible on the display
during a call.
Flash for landline calls
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 41.
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls Using the Handset
N.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller's information is displayed after you hear
the call waiting tone on the handset.
1
Press MCALL WAITN to answer the 2nd
call.
2
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
You can temporarily switch the dialing mode
to tone when you need to access touch-tone
services (for example, answering services,
telephone banking services, etc.).
Press * (TONE) before entering access
numbers which require tone dialing.
Handset clarity booster
This feature can improve sound clarity when
the handset is used in an area where there
may be interference. During an outside call,
this feature is turned on automatically when
necessary.
R When this feature is turned on,
displayed. However, during a cellular call,
is not displayed even though the
feature is activated.
is
23