Jumper Settings - Asus TXP4 User Manual

III. INSTALLATION

Jumper Settings

1. Flash ROM Boot Block Programming (BBLKW)
This sets the operation mode of the boot block area of the Programmable Flash
ROM to allow programming in the Enabled position. This is required only if
prompted by the Flash Memory Writer Utility as shown in BIOS SOFTWARE.
Programming
Disabled
Enabled
R
TXP4 Boot Block Programming
2. Real Time Clock (RTC) RAM (CLRTC)
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1) Turn off your computer, (2) Short solder points using a small
metalic object, (3) Turn on your computer, (4) Hold down <Delete> during bootup
and enter BIOS setup to re-enter user preferences.
RTC RAM CLRTC
Clear Data [short solder points momentarily]
R
TXP4 RTC RAM (Clear Data)
BBLKW
[1-2] (Default)
[2-3]
BBLKW
Disabled/Protect
(Default)
CLRTC
Short solder points
to Clear Data
ASUS TXP4 User's Manual
BBLKW
Enabled
15