Installing And Removing The Desktop Board; Desktop Board D915Gmh Mounting Screw Hole Locations - Intel D915GMH Product Manual

Installing and Replacing Desktop Board Components

Installing and Removing the Desktop Board

WARNING
Only qualified technical personnel should do this procedure. Disconnect the computer from its
power source before performing the procedures described here. Failure to disconnect the power
before you open the computer can result in personal injury or equipment damage.
NOTE
Refer to Appendix B for regulatory requirements.
A BTX chassis is required to install the D915GMH desktop board and power supply. Refer to your
BTX chassis manual for instructions on installing and removing the desktop board.
Figure 4 shows the location of the seven mounting holes for the D915GMH desktop board.
OM17179
Figure 4. Desktop Board D915GMH Mounting Screw Hole Locations
29