Fan Control Configuration Submenu - Intel D845PEBT2 Specification

Intel Desktop Board D845PEBT2 Technical Product Specification
Table 78. Chipset Configuration Submenu (continued)
Feature
SDRAM RAS Active to
(Note)
Precharge
SDRAM CAS# Latency
(Note)
SDRAM RAS# to CAS#
(Note)
Delay
SDRAM RAS#
(Note)
Precharge
Note: This feature is displayed only if SDRAM Timing Control is set to Manual – User Defined.

4.4.10 Fan Control Configuration Submenu

To access this menu, select Advanced on the menu bar and then Fan Control Configuration.
Maintenance
The submenu represented in Table 78 is for configuring fan control options.
Table 79.

Fan Control Configuration Submenu

Feature
Fan Control
Lowest Fan Speed
Note: These options will not take effect until power has been completely removed from the system. After saving the BIOS
settings and turning off the system, unplug the power cord from the system and wait at least 30 seconds before
reapplying power and turning the system back on.
112
Options
• 8
• 7
• 6
• 5 (default)
• 2.0 (default)
• 2.5
• 4
• 3
• 2 (default)
• 4
• 3
• 2 (default)
Main
Advanced
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
Fan Control Configuration
Options
• Disabled
• Enabled (default)
• Slow (default)
• Off
Description
Corresponds to tRAS.
Selects the number of clock cycles required to
address a column in memory.
Selects the number of clock cycles between
addressing a row and addressing a column.
Selects the length of time required before accessing
a new row.
Security Power
Description
Enables or disables fan control.
Defines the lower limit of chassis fan speed
operation.
When set to Slow, at low system temperatures the
fans will continue to run at slow speed.
When set to Off, at low system temperatures the fans
will turn off.
Boot Exit