Os/2 V3.0 (Warp) - Asus SP97 User Manual

IX. SOFTWARE DRIVERS

7. OS/2 V3.0 (Warp)

7.0 Driver & OS/2 Version Notes
1. The following description apply to "SiS 5597/5598 Driver Release V1.03" and
maybe later release version but not guaranteed.
2. All the OS/2 Warp Versions up to SiS 5597/5598 driver Rev. 1.03 would be
installed as described in this section except for Double Bytes OS/2 Warp (i.e.
Chinese, Japanese, Korea, etc.).
3. For Double Bytes OS/2 Warp installation, please refer to "Sec. 8 Double Bytes
OS/2 Warp".
7.1 Driver Files
The enclosed SiS 5597/5598 OS/2 3.0 driver contains the following files:
SISINST.CMD
SVGA.EXE
S768256.DL@
OTHERS
7.2 Installation
Before install SiS 5597/5598 OS/2 drivers, make sure:
1. Install your OS/2 system using "VGA display" option (i.e. standard VGA).
2. Start your OS/2 system.
Install SiS 5597/5598 OS/2 Warp drivers as following procedures:
1. Enter "OS/2 window" or "OS/2 full screen".
2. Change directory to which holds the SiS 5597/5598 OS/2 3.0 display drivers
and type SISINST <Enter>. For example, A:\OS2\SBCS.30>SISINST
3. All the Driver Files will be copied to a subdirectory C:\SISDRV and the
"Select Screen parameters for SiS SVGA" menu appears and all the resolution
(and color) and frame rate supported would be shown on the screen.
4. Choose which one you would like to use and click "OK".
5. Then installation program would complete all installation process and
create a "SiS Setup" for future change mode usage.
6. Shutdown and re-boot OS/2 to make your selection effectively.
SiS driver install program
SiS PMI Generator
SiS IBMDEV32.DLL Display Driver
other files required during installation
ASUS SP97-V User's Manual 93