Asus SP97 User Manual page 84

IX. SOFTWARE DRIVERS
3. Windows NT 3.5 & 3.51
3.0 Version Note
The following description apply to "SiS 5597/5598 Driver Release V1.03" and maybe
later release version but not guaranteed.
3.1 Driver Files
(1) The enclosed SiS 5597/5598 Windows NT 3.5 & 3.51 drivers are:
SISTAG
SISV.DLL
(2) All the 16-color, 256-color, 32K/64K-color, and 16M-color drivers are available.
3.2 Installation
1. Select Control Panel from Main group.
2. Select Display icon.
3. Select Change Display Type from Display Settings.
4. Select Change from Display Type.
5. Select Other from Select Device.
6. Place the SiS 5597/5598 CD-title Disk into CD-ROM Drive.
7. When the "Install from Disk" dialog box appears, type the directory storing the
drivers and click "OK".
The directory in CD-Title is at "D:\MM\WINNT\WINNT35".
8. Select Install and click "Yes" when the "Installing Driver" dialog box appears.
9. Select New when the "Windows NT Setup" dialog box appears.
10. Click "Continue" - A message will appear stating that the drivers were success-
fully installed. Click "OK". You must now restart Windows NT 3.51.
3.3 Selecting resolution and color depth
1. Select Control Panel from Main group.
2. Select Display icon.
3. Select Color Palette to change between 16 colors, 256 colors, 32768 colors,
65536 colors, and 16777216 colors.
4. To select desktop resolution size, go to the Desktop area and use the slide bar to
change resolution from 640x480, 800x600, 1024x768, and 1280x1024.
5. Select Test to test the resolution.
If the display test screen was good then select "Yes" when the "Testing Mode"
dialog box appears. If the display test screen was bad then select "No". Win-
dows NT will give you an error message.
6. If the display test screen was good and you select "Yes", Windows
NT 3.51 will prompt you to restart Windows NT 3.51.
84
SISV.SYS
OEMSETUP.INF
ASUS SP97-V User's Manual
SISV256.DLL