Audio Connectors; Audio Subsystem Software - Intel D845GRG Using Manual

•
Front panel audio connector, including pins for:
 Line out
 Mic in
•
Back panel audio connectors:
 Line out
 Line in
 Mic in
For information about
Upgrading the onboard audio subsystem using a CNR audio card

1.9.1 Audio Connectors

1.9.1.1 Front Panel Audio Connector
A 2 x 5-pin connector provides mic in and line out signals for front panel audio connectors
For information about
Obtaining the Front Panel I/O Connectivity Design Guide
1.9.1.2 Auxiliary Line In Connector
A 1 x 4-pin ATAPI-style connector connects the left and right channel signals of an internal audio
device to the audio subsystem.
1.9.1.3 ATAPI CD-ROM Audio Connector
A 1 x 4-pin ATAPI-style connector connects an internal ATAPI CD-ROM drive to the audio
mixer.

1.9.2 Audio Subsystem Software

Audio software and drivers are available from Intel's World Wide Web site.
For information about
Obtaining audio software and drivers
12
The front panel audio connector can also be used as a jumper block for routing audio signals. For more
information about the configurations of this connector, refer to the Product Supplement Document for your
Desktop Board.
Product Description
Refer to
Section 1.11, page 31
12
.
Refer to
Section 1.4, page 13
Refer to
Section 1.2, page 12
29