Intel D845GRG Using Manual page 10

Technical Product Specification for Intel Desktop Boards using the Intel 845G Chipset
Table 1. Feature Summary (continued)
I/O Control
Video
Peripheral
Interfaces
Hardware
Management
4
Subsystem
5
CNR
5
LAN
Instantly Available
PC Technology
For information about
The board's compliance level with ACPI, Plug and Play, and SMBIOS
Available configurations for Intel Desktop Boards using the Intel 845G Chipset
✏
NOTE
The LAN and the CNR features are mutually exclusive.
4
Contact your Intel sales representative to determine which type of hardware monitoring ASIC is present on
your Intel Desktop Board.
5
The CNR connector and the LAN subsystem are mutually exclusive features. Contact your Intel sales
representative to determine which of these features is present on your Intel Desktop Board.
10
LPC Bus I/O controller (SMSC LPC47M172 or National Semiconductor PC87372)
• Intel
®
Extreme Graphics controller
• AGP connector supporting 1x, 2x, and 4x AGP cards (1.5 V only) or an AGP
Digital Display (ADD) card
• Integrated retention mechanism
• Up to six USB ports
• One serial port
• One parallel port
• Two IDE interfaces with UDMA 33, ATA-66/100 support
• One diskette drive interface
• PS/2
†
keyboard and mouse ports
• Three fan connectors
• Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• Two fan sense inputs used to monitor fan activity
• Fan speed control
• Chassis intrusion detection
• Hardware management ASIC
One Communication and Networking Riser (CNR) connector
®
Intel 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device
• Support for PCI Local Bus Specification Revision 2.2
• Suspend to RAM support
• Wake on PCI, CNR, RS-232, front panel, PS/2 devices, and USB ports
Refer to
Section 1.4, page 13
Section 1.2, page 12