Table of Contents
Advertisement
Base/Extended/Total Memory [xxxK]
The base memory, extended memory, and total memory values are auto-
detected. These fields are not user-configurable.
4.3.1 Primary IDE Master
Auto-Detection
Primary IDE Master
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
PIO Mode
UDMA Mode
Transfer Mode
S.M.A.R.T Status
Auto-Detection [Press Enter]
Press Enter to automatically detect an IDE drive, if the drive is not yet
detected. Upon pressing Enter, the message "Detecting Hard Drive..."
appears as the BIOS attempts to detect the presence of a IDE drive.
Primary IDE Master [Auto]
Select [Auto] to automatically detect an IDE drive. If automatic detection is
successful, the setup BIOS automatically fills in the correct values for the
remaining fields on this sub-menu.
If automatic detection fails, this may be because the IDE drive is too old or
too new. If the drive was already formatted on a previous system, the
BIOS may detect incorrect parameters. In these cases, select [Manual] to
manually enter the IDE drive parameters. Refer to the section "Manually
detecting an IDE drive."
If no drive is installed or if you are removing a drive and not replacing it,
select [None]. Configuration options: [None] [Auto] [Manual]
The IDE drive information items are grayed out when this item is set to
[Auto].
ASUS PCH-DL motherboard
Primary Master
[Press Enter]
[Auto]
[Auto]
0 MB
0
0
0
0
0
[Auto]
[Auto]
None
None
Select Menu
Item Specific Help
To auto-detect the
HDD's size, head...on
this channel.
4-7
Advertisement
Table of Contents
