Internal Connectors; Floppy Disk Drive Connector (34-1 Pin Floppy) - Asus PCH-DL User Manual

2.7.2 Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY1)
This connector supports the provided floppy drive ribbon cable. After
connecting one end to the motherboard, connect the other end to the
floppy drive. (Pin 5 is removed to prevent incorrect insertion when
using ribbon cables with pin 5 plug).
PCH-DL
PCH-DL Floppy Disk Drive Connector
2. Serial ATA connectors (7-pin SATA1, SATA2)
These next generation connectors support the thin Serial ATA cables
for Serial ATA hard disks. The current Serial ATA interface allows up to
150 MB/s data transfer rate, faster than the standard parallel ATA with
133 MB/s (Ultra ATA/133).
If you installed Serial ATA hard disks, you may create a RAID 0/RAID 1
configuration using the RAID feature of the Intel
PCH-DL
PCH-DL SATA Connectors
The Serial ATA RAID feature (RAID 0/1) is available only if you are
using Windows XP.
ASUS PCH-DL motherboard
FLOPPY1
PIN 1
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
®
SATA1
SATA2
6300ESB ICH.
2-23