Table of Contents
Advertisement
2.3
Main menu
When you enter the BIOS Setup program, the Main menu screen appears, giving you an
overview of the basic system information.
Refer to section 2.2.1 BIOS menu screen for information on the menu screen items and
how to navigate through them.
Main
Advanced
System
Time
System Date
Legacy Diskette A
Primary IDE Master
Primary IDE Slave
SATA 1
SATA 2
SATA 3
SATA 4
Storage Configuration
System Information
2.3.1
System Time [xx:xx:xx]
Allows you to set the system time.
2.3.2
System Date [Day xx/xx/xxxx]
Allows you to set the system date.
2.3.3
Legacy Diskette A [1.44M, 3.5 in.]
Sets the type of floppy drive installed. Configuration options: [Disabled] [360K,
5.25 in.] [1.2M, 5.25 in.] [720K, 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.]
2.3.4
Primary IDE Master/Slave, SATA1~4
While entering Setup, the BIOS automatically detects the presence of IDE/SATA devices.
There is a separate sub-menu for each IDE/SATA device. Select a device item then press
<Enter> to display the IDE/SATA device information.
The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size,
LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring). These
values are not user-configurable. These items show N/A if no IDE/SATA device is installed in
the system.
Type [Auto]
Selects the type of IDE/SATA drive. Setting to Auto allows automatic selection of the
appropriate IDE/SATA device type. Select CDROM if you are specifically configuring a CD-
ROM drive. Select ARMD (ATAPI Removable Media Device) if your device is either a ZIP,
LS-120, or MO drive. Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]
This item does appear when you select the SATA 1/2/3/4 devices.
2-10
Power
[12:56:38]
[Sat 01/05/2002]
[1.44M, 3.5 in]
:[Not Detected]
:[Not Detected]
:[Not Detected]
:[Not Detected]
:[Not Detected]
:[Not Detected]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
Tools
Exit
Use [ENTER], [TAB] or
[SHIFT-TAB] to select
a field.
Use [+] or [-] to
configure system time.
Select Screen
Select Item
+-
Change Field
Tab
Select Field
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 2: BIOS setup
Advertisement
Table of Contents
